Please call us at (610) 871-1673 for availabiity of a factory-fresh Reverend.
Reverend Pete Anderson PA-1 RT - Satin Rock Orange
After the success of the Pete Anderson Signature PA-1, Reverend wanted something with a little more upper-twang. So the Pete Anderson Signature PA-1 RT was born, with all of the same great features of the PA-1, but loaded with Revtron mini-humbuckers for extra punch and sustain. The PA-1 RT still has the innovative Uni-Brace system so that you can play at higher volumes without uncontrollable feedback. This guitar still has the same PA-1 styling and construction: bushing mounted bridge, "R" embossed knobs, back sprayed/logoed pickguard and 15th fret neck/body joint for better high-fret access. Be like Pete. Get one and create your own legend. The Reverend Pete Anderson PA-1 RT is also available in Satin Metallic Emerald finish.
All of our Reverend Pete Anderson PA-1 RT guitars are brand new, factory-fresh, in unplayed condition, and come with Reverend's 1 year warranty. Reverend's unique serial # and the initials of their resident guitar tech who set up and inspected the guitar are found on the back of each headstock.
REVTRON BRIDGE PICKUP
Slightly hotter than a vintage F-tron for extra punch and sustain the originals lacked. 42 gauge wire, alnico 5 magnets, 7.5K ohms.
REVTRON NECK PICKUP
Slightly hotter than a vintage F-tron for extra punch and sustain the originals lacked. 42 gauge wire, alnico 5 magnets, 5.5K ohms.
This korina brace is full body depth, connecting the top and back. It reduces uncontrollable feedback, improves sustain and clarity while maintaining full hollow body tone. It also increases long term structural integrity by preventing the neck block from rotating forward from string tension.
BASS CONTOUR/REVEREND EMBOSSED KNOBS
This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!
A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes. Also, the posts are custom height, eliminating the need for a second string tree.
Every Reverend is hand initialed on the back of the headstock by Zack Green, Reverend's highly skilled technician who sets up, inspects and tests every instrument.
BIGSBY WITH SOFT TOUCH SPRING & ROLLER BRIDGE
Reverend's Bigsby tremolo system feels great and stays in tune all night long! Reverend installed a custom Soft Touch spring into all of their Bigsbys for easy, smooth action. Reverend's roller bridge works with their Pin-Lock tuners and Boneite nut to create a system that strings glide through every time.
Reverend uses "Boneite", a synthetic bone nut that is more consistent than natural bone, on all of their instruments. Boneite reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.
DUAL-ACTION TRUSS ROD
Reverend's dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It's also located at the headstock for easy acess.
CUSTOM JACK PLATE
Reverend's proprietary jack plate features four mounting screws instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class.
PURE TONE JACK
All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.
TREBLE BLEED CIRCUIT
All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great.
Reverend uses Alpha control pots with a +-10% rating. While a typical pot is +-20%, Reverend's pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.
10% POLY CAPS
Reverend uses caps with a +-10% rating, while a typical cap is +-20%. Reverend's caps are made to tighter specifications, so they're more consistent. Made of polyester, they're also longer lasting and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.